HiTorque 7350 Deluxe Mini Lathe - 7x16
- Features of 5100 (most powerful, most low-speed torque, gearless spindle, cam-lock TS, 4" chuck)
- Includes DRO readouts on compound rest, cross slide, and tailstock
- Metal hand wheels and chrome levers
- Includes 0XA wedge-type quick change tool post and five tool holders
- CHUCK GUARD HAS NOW BEEN REMOVED
Weight: 129 lb
Price: $1,699.00
http://lmscnc.com/7350
This lathe comes equipped with digital readouts on the cross slide, compound rest, and tailstock quill. The attractive hand wheels are all metal, and the levers are chrome.
The 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 50 RPM to 2500 rpm continuously in both directions. There are no gears to shift.
The all steel, wedge-type quick change tool posts accepts turning tools up to 1/2" shank. It comes with five toolholders (for details, see part number 3112).
Real top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.35 to 8 mm pitch with the extra 21 tooth change gear that is included. Cutting inch threads is made even easier with the factory-installed threading dial.
The 7x16 lathe includes a chip tray, a backsplash guard, and spreaders to give the feet a broader stance.
This machine is shipped completely assembled and adjusted. Machined surfaces are coated with a viscous oil to prevent rust. It wipes off easily with a rag; no solvents necessary.
The LittleMachineShop.com model 7350 HiTorque Mini Lathe is a version of the SIEG SC2.
*NOTE* We ship machines only to the US and Canada.
Chris' Tips- Mini Lathe Users Guide written by Chris Wood
- Digital readouts on the compound rest, cross slide, and tailstock quill
- 500 Watt output spindle motor
- NSK brand Japanese-quality spindle bearings
- No gears in spindle drive
- Metal hand wheels
- Chrome levers
- E-stop safety power switch
- Extended threading capability - inch and metric threads
- Rear apron shield to keep swarf out of the mechanism
- Cam lock tailstock with DRO
- Quick change tool post set with five tool holders
- Reversible lead screw for right and left hand threads
- 4" 3-jaw chuck
- Threading dial
| Swing Over Bed | 7" (180 mm) |
| Swing Over Saddle | 4.3" (110 mm) |
| Distance Between Centers | 16.1" (410 mm) |
| Spindle Through Hole | 0.8" (20 mm) |
| Spindle Motor Output | 0.7 hp (500 Watts) |
| Range of Threads | 4-80 TPI (0.3-8 mm) |
| Spindle Taper | #3 Morse taper |
| Tailstock Taper | #2 Morse taper |
| Spindle Speed | 50 - 2500 RPM |
| Cross Slide Travel | 2.6" (65 mm) |
| Power Requirements | 120 V 60 Hz 8 Amps |
| Crated Weight | 114 lbs (52 kg) |
| Machine Weight | 91 lbs (41 kg) |
| Overall Dimensions (W x D x H) | 31" x 10" x 12" (790 mm x 260 mm x 300 mm) |
| Crate Dimensions (W x D x H) | 35" x 16" x 15" (900 mm x 410 mm x 380 mm) |
 |
DRO on Compound and Cross Slide |
 |
DRO Display |
 |
Control Panel |
The HiTorque Deluxe Mini Lathe comes with the following:
- Mini Lathe Users Guide written by Chris Wood
- 4" (100 mm) 3-jaw self centering lathe chuck with two sets of jaws and a chuck wrench
- Quick change tool post with five toolholders
- A Morse taper #2 dead center for the tailstock
- An 11-gear change gear set that includes a 21 tooth gear for accurate metric threading
- Two open end wrenches
- Four hex (Allen) wrenches
- A plastic oil can
These machines ship by truck because they are simply too heavy and bulky for UPS Parcel Service. We normally ship truck orders a day or two after we receive the order. We add the following shipping cost to your order total:
| . | Local | Far West | Other Continental US |
| Delivery to commercial address | $59 | $115 | $145 |
| Delivery to school or secured location | $79 | $155 | $175 |
| Liftgate, additional | Incl. | $20 | $20 |
| Delivery to freight terminal | $115 | $115 | $145 |
| Delivery to residential address (includes liftgate) | $79 | $175 | $195 |
"Local" refers to the parts of Southern California served by Hollywood Delivery Service.
"Far West" refers to ten western states: CA, OR, WA, AZ, NV, ID, UT, NM, CO, WY.
For delivery to Alaska, Hawaii, or Puerto Rico, we will check with several trucking companies to get the best price and then call for your approval before we ship.
For Canadian shipments we will provide an all-inclusive quotation for shipping, brokerage, and taxes. The brokerage fees are $108. The taxes vary by province. If you have a customs broker or want to self-clear customs please let us know.
We ship machines only to the US and Canada.
The shipping charges shown above cover the cost of shipping the machine and anything else that you purchase with it, including a second (and third) machine, up to 700 pounds total.
A "commercial address" has a company name, a public entrance and posted hours of operation. If you do not have a forklift or loading dock at your place of business, you must add the liftgate fee. If you are running a business at your residence without a public entrance and posted company name and hours of operation it is considered a residence and a not commercial address.
Schools, colleges, universities, university hospitals, military bases, government facilities and other secured locations are charged a limited access fee that is included in the amounts in the chart above.
If you choose Terminal Pickup, and there is not a terminal within 30 miles, we will confirm with you that you still want Terminal Pickup.
Liftgate service is included in the residential delivery fee. The trucking company will call you to schedule the delivery.
We offer inside delivery which gets the machine inside one doorway or into your garage:
| Local | Far West | Other Continental US | ||
| Inside Delivery | Gets the machine inside 1 threshold Includes liftgate service |
$20 | $75 | $75 |
Bench Grinder, 8" Low Speed
