Power Feed, X3 & SX3 Mills
- Fits X3 and SX3 Mills, Grizzly G0463 and G0619
Weight: 11.1 lb
Regularly $429.95
http://lmscnc.com/5114
This power feed mounts on the left end of the mill's table and drives the X-axis feed screw. It is variable speed (0 to 12 inches per minute).
The kit takes about 20 minutes to install. It is a bolt-on accessory for the mini mill and requires no modifications to the machine. The power feed adds 8 1/4" inches to the left end of the table.
The power feed works on 120-240V 50-60Hz power. It has a computer-style (IEC 60320 C3/C4) power cord that unplugs from the power supply unit. This makes it easy to adapt for other countries. The furnished power cord has a North American (NEMA 5-15P) wall plug.
Chris' TipsHiTorque Mini Mill Power Feed
 |
| Main controller panel with clutch controller (inset). |
 |
| Limiter switch box with T-Blocks equipped with adjustable pin shafts. |
Compatibility
This product works with the following mills. (If your machine is not on this list, we cannot verify compatibility.)
- SIEG X3 Small Mill
- SIEG SX3 Small Mill
HiTorque 6500 Bench Mill
