Electronic Digital Caliper 6", 4 Buttons
- 6" (150 mm) range
- 0.0005" (0.01 mm) resolution
- 0.001" (0.02 mm) accuracy
- Reads inches or mm
- Four button model has display lock
Part Number: 1758
Weight: 0.73 lb
Weight: 0.73 lb
Price: $24.95
Share this page:
http://lmscnc.com/1758
http://lmscnc.com/1758
This 6" electronic digital caliper has manual power on and off. It won't go off and lose your measurement.
There are four buttons (one more than most digital calipers).
OFF/ON: Turns the power on and off.
ZERO: Sets the readout to zero at any position.
MM/INCH: Switches between inch and metric display.
HOLD: Locks the display. Use this button when you take a measurement where you cannot easily see the display. Press HOLD again to unlock the display.
You can make absolute or relative inside, outside, depth, and step measurements.
Furnished with a fitted case.
Chris' TipsAccuracy—indicates how close a measured value is to the true quantity of what is being measured.
Resolution—is the smallest increment the system can display or measure. It's one division on a dial, or the smallest increment of the righmost digit on a digital display.
| Range | 0" - 6" (0 mm - 152 mm) |
| Resolution | 0.0005" (0.013 mm) |
| Accuracy | 0.001" (0.03 mm) |
| Clear to Zero | Yes |
| Inch/mm Display | Yes |
| Fraction Display | No |
 |
Decimal Inch Display |
 |
Metric Display |
Compatibility
This product works with these LittleMachineShop.com products:
Angle Plates, Set of Two
