|
Hole size is a positive number from 0.01" (0.25 mm) to 1" (25.4 mm) Check the drill sets that you own on the Settings page. |
|
|
- 1/4" Drill capacity
- 0 to 3600 and 0 to 5000 RPM continuously variable speed ranges
- Cast iron base and steel column
- DRO depth readout
|
|
- Milling machine chip shield uses strong Neodymium magnets to mount to the front or back of a machine
- Conveniently remove without the hassle of fussing with tools or screws
- Adjustable friction hinges allow setting the side panels at any angle up to 150 degrees
- Compatible with any 3"- 4" milling vise with a flat surface on either end
- Approximate dimensions: 11 1/4" x 3 3/4" x 1/4"
|
|
- 0-1" dial indicator with 0.001" resolution
- 0-15-0 dial test indicator with 0.0005" resolution
- Magnetic base indicator holder with fine adjustment
- 22 piece indicator point set
- All in a plastic case
|
|
|
Quick Change Tool Holder - Lathe Bit Rapid Retractor, 0XA
