HiTorque 5100 Mini Lathe - 7x16
- Extended bed (16" between centers) provides more working room
- Most powerful and most low-speed torque in its class. No gears in spindle drive
- 4" 3-jaw lathe chuck
- Cam lock tailstock
- CHUCK GUARD HAS NOW BEEN REMOVED
Weight: 127 lb
Price: $1,299.00
http://lmscnc.com/5100
The 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 50 rpm to 2500 rpm continuously in both directions. There are no gears to shift.
The cross feed and compound rest dials are graduated in 0.001" and 0.025 mm. A 4" 3-jaw lathe chuck is included, and the lathe is equipped with a 4-way indexing tool post set for 5/16" (8 mm) tools.
Real top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.35 to 8 mm pitch with the extra 21 tooth change gear that is included. Cutting inch threads is made even easier with the factory-installed threading dial.
This HiTorque 7x16 Mini Lathe for sale includes a chip tray, a backsplash guard, and spreaders to give the feet a broader stance.
This machine is shipped completely assembled and adjusted. Machined surfaces are coated with a viscous oil to prevent rust. It wipes off easily with a rag--no solvents necessary.
The LittleMachineShop.com model 5100 HiTorque Mini Lathe is a version of the SIEG SC2.
*NOTE* We ship machines only to the US and Canada.
Chris' Tips- Mini Lathe Users Guide written by Chris Wood
- 500 Watt output spindle motor
- NSK brand Japanese-quality spindle bearings
- No gears in spindle drive
- E-stop safety power switch
- Zero-settable hand wheels graduated in 0.001" on cross slide and compound rest
- Extended threading capability - inch and metric threads
- Rear apron shield to keep swarf out of the mechanism
- Cam lock tailstock
- Four-way tool post
- Reversible lead screw for right and left hand threads
- 4" 3-jaw chuck
- Threading dial
| Swing Over Bed | 7" (180 mm) |
| Swing Over Saddle | 4.3" (110 mm) |
| Distance Between Centers | 16.1" (410 mm) |
| Spindle Through Hole | 0.8" (20 mm) |
| Spindle Motor Output | 0.7 hp (500 Watts) |
| Range of Threads | 4-80 TPI (0.3-8 mm) |
| Spindle Taper | #3 Morse taper |
| Tailstock Taper | #2 Morse taper |
| Spindle Speed | 50 - 2500 RPM |
| Cross Slide Travel | 2.6" (65 mm) |
| Power Requirements | 120 V 60 Hz 8 Amps |
| Crated Weight | 112 lbs (51 kg) |
| Machine Weight | 90 lbs (41 kg) |
| Overall Dimensions (W x D x H) | 31" x 10" x 12" (790 mm x 260 mm x 300 mm) |
| Crate Dimensions (W x D x H) | 35" x 16" x 15" (900 mm x 410 mm x 380 mm) |
|
5100 HiTorque 7x16 Mini Lathe |
The HiTorque Mini Lathe comes with the following:
- Mini Lathe Users Guide written by Chris Wood
- 4" (100 mm) 3-jaw self centering lathe chuck with two sets of jaws and a chuck wrench
- A Morse taper #2 dead center for the tailstock
- An 11-gear change gear set that includes a 21 tooth gear for accurate metric threading
- Two open end wrenches
- Four hex (Allen) wrenches
- A plastic oil can
These machines ship by truck because they are simply too heavy and bulky for UPS Parcel Service. We normally ship truck orders a day or two after we receive the order. We add the following shipping cost to your order total:
| . | Local | Far West | Other Continental US |
| Delivery to commercial address | $59 | $115 | $145 |
| Delivery to school or secured location | $79 | $155 | $175 |
| Liftgate, additional | Incl. | $20 | $20 |
| Delivery to freight terminal | $115 | $115 | $145 |
| Delivery to residential address (includes liftgate) | $79 | $175 | $195 |
"Local" refers to the parts of Southern California served by Hollywood Delivery Service.
"Far West" refers to ten western states: CA, OR, WA, AZ, NV, ID, UT, NM, CO, WY.
For delivery to Alaska, Hawaii, or Puerto Rico, we will check with several trucking companies to get the best price and then call for your approval before we ship.
For Canadian shipments we will provide an all-inclusive quotation for shipping, brokerage, and taxes. The brokerage fees are $108. The taxes vary by province. If you have a customs broker or want to self-clear customs please let us know.
We ship machines only to the US and Canada.
The shipping charges shown above cover the cost of shipping the machine and anything else that you purchase with it, including a second (and third) machine, up to 700 pounds total.
A "commercial address" has a company name, a public entrance and posted hours of operation. If you do not have a forklift or loading dock at your place of business, you must add the liftgate fee. If you are running a business at your residence without a public entrance and posted company name and hours of operation it is considered a residence and a not commercial address.
Schools, colleges, universities, university hospitals, military bases, government facilities and other secured locations are charged a limited access fee that is included in the amounts in the chart above.
If you choose Terminal Pickup, and there is not a terminal within 30 miles, we will confirm with you that you still want Terminal Pickup.
Liftgate service is included in the residential delivery fee. The trucking company will call you to schedule the delivery.
We offer inside delivery which gets the machine inside one doorway or into your garage:
| Local | Far West | Other Continental US | ||
| Inside Delivery | Gets the machine inside 1 threshold Includes liftgate service |
$20 | $75 | $75 |
HiTorque 7350 Deluxe Mini Lathe - 7x16
