HiTorque 3990 Mini Mill
- Most powerful mini mill machine in its class
- Most low-speed torque in its class
- No gears in spindle drive
- Largest table and X-Y travel in its class
- R8 spindle and drill chuck
Weight: 177 lb
Price: $1,299.00
http://lmscnc.com/3990
This mill has a solid column. It does not tilt from side to side. This construction is significantly stiffer than the tilting column on other mini mills. This model also includes the air spring head support for even support through the Z-axis range of travel.
The 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 100 rpm to 2500 RPM continuously. There are no gears to shift. And, with no gears, the HiTorque Mini Mill machine is the quietest in its class.
The large mill table provides 50% more table area than other mini mills. It also has 30% more travel in each direction. The resettable feed dials allow you to zero them at any point.
The HiTorque Mini Mill has drill press handles for drilling and fast motion of the mill's head. It also has Z-axis fine feed with 0.001" resolution for milling operations.
This machine is shipped completely assembled and adjusted. Machined surfaces are coated with a viscous oil to prevent rust. It wipes off easily with a rag; no solvents necessary.
*NOTE* We ship machines only to the US and Canada.
Chris' Tips
- 500 Watt output spindle motor
- Large X-Y table
- R8 Spindle for wide tool availability
- Solid column that does not tilt
- NSK brand Japanese-quality spindle bearings
- Gas strut provides even support through the Z-axis range
- Dovetail column maintains head alignment at any height
- Fine feed on Z-axis for precise control
- Three radial handles for drilling
- E-stop safety power switch
- Adjustable Z-axis stop for repetitive drilling
- Neoprene bellows protect horizontal ways
- Adjustable gibs on all dovetail ways
- Includes R8 to 33JT drill chuck arbor and 1/2" drill chuck
| End Milling Capacity | 0.6" (16 mm) |
| Face Milling Capacity | 1.2" (30 mm) |
| Drilling Capacity | 0.5" (13 mm) |
| Table Size | 18.1" x 4.7" (460 mm x 120 mm) |
| T-Slots | 3 slots 0.47" (12.0 mm) wide |
| X-Axis Travel | 11.8" (300 mm) |
| Y-Axis Travel | 5.1" (130 mm) |
| Z-Axis Travel | 10.6" (270 mm) |
| Throat | 6.5" (165 mm) |
| X- and Y-Axis Feed Screws | 0.062" (1.59 mm) per rotation |
| Positioning Accuracy | 0.0004" (0.010 mm) |
| Spindle Taper | R8 |
| Spindle Motor | 0.67 hp (500 Watts) |
| Spindle Speed | 100 - 2500 RPM |
| Power Requirements | 120 V 60 Hz 8 Amps |
| Machine Weight | 124 lbs (56 kg) |
| Base Dimensions (W x D) | 8.5" x 14.2" (216 mm x 362 mm) |
| Mounting Holes Center to Center (W x D) | 7.09" x 11.81" (180.0 mm x 300.0 mm) |
| Overall Dimensions (W x D x H) | 23.2" x 19.7" x 36.3" (590 mm x 500 mm x 922 mm) |
| Crated Weight | 177 lbs (80 kg) |
| Crate Dimensions (W x D x H) | 23.6" x 25.0" x 29.9" (600 mm x 635 mm x 760 mm) |
|
3990 HiTorque Mini Mill |
 |
Front View |
 |
Side View |
 |
Control Box |
 |
Solid Column Rigid Base |
 |
Back View Solid Column Rigid Base |
 |
The solid column on the left, tilting column on the right. The solid column has significantly thicker walls |
The HiTorque Mini Mill comes with the following:
- Mini Mill Users Guide written by Chris Wood
- Two T-slot nuts
- Two end wrenches
- Four hex (Allen) wrenches
- One spanner wrench
- Oil can (plastic)
- One 1/2" drill chuck and R8 arbor
Compatibility
This product works with these LittleMachineShop.com products:
These machines ship by truck because they are simply too heavy and bulky for UPS Parcel Service. We normally ship truck orders a day or two after we receive the order. We add the following shipping cost to your order total:
| . | Local | Far West | Other Continental US |
| Delivery to commercial address | $59 | $115 | $145 |
| Delivery to school or secured location | $79 | $155 | $175 |
| Liftgate, additional | Incl. | $20 | $20 |
| Delivery to freight terminal | $115 | $115 | $145 |
| Delivery to residential address (includes liftgate) | $79 | $175 | $195 |
"Local" refers to the parts of Southern California served by Hollywood Delivery Service.
"Far West" refers to ten western states: CA, OR, WA, AZ, NV, ID, UT, NM, CO, WY.
For delivery to Alaska, Hawaii, or Puerto Rico, we will check with several trucking companies to get the best price and then call for your approval before we ship.
For Canadian shipments we will provide an all-inclusive quotation for shipping, brokerage, and taxes. The brokerage fees are $108. The taxes vary by province. If you have a customs broker or want to self-clear customs please let us know.
We ship machines only to the US and Canada.
The shipping charges shown above cover the cost of shipping the machine and anything else that you purchase with it, including a second (and third) machine, up to 700 pounds total.
A "commercial address" has a company name, a public entrance and posted hours of operation. If you do not have a forklift or loading dock at your place of business, you must add the liftgate fee. If you are running a business at your residence without a public entrance and posted company name and hours of operation it is considered a residence and a not commercial address.
Schools, colleges, universities, university hospitals, military bases, government facilities and other secured locations are charged a limited access fee that is included in the amounts in the chart above.
If you choose Terminal Pickup, and there is not a terminal within 30 miles, we will confirm with you that you still want Terminal Pickup.
Liftgate service is included in the residential delivery fee. The trucking company will call you to schedule the delivery.
We offer inside delivery which gets the machine inside one doorway or into your garage:
| Local | Far West | Other Continental US | ||
| Inside Delivery | Gets the machine inside 1 threshold Includes liftgate service |
$20 | $75 | $75 |
HiTorque 5100 Mini Lathe - 7x16
